Welch-allyn LumiView Portable Binocular Microscope - User Manu Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
Connecting to the Power Source
NOTE: The instrument power cord must be plugged into either a
Welch
Allyn
Portable Power Source No. 75250 or a Welch
Allyn
Direct
Plug-In Power
Source
No. 75210.
a
I
CAUTION: The lamp housing becomes hot when the
.
lamp is on for more than 5 minutes and can cause
a burn if it contacts the skin. Allow at least 10 min-
utes for cooling between the uses of the illuminator.
Portable Power Source
l
Plug
instrument power cord
into the power cord connector
port on top of the power source.
l
Push in until firmly in place.
l
Gently screw the external
connector sleeve clockwise
to secure (optional).
l
Attach the Portable Power
Source by using the belt clip.
l
The instrument is now ready for use.
Direct Plug-In Power Source
l
Plug Power cord from the
Binocular microscope into the
Direct Plug-In Power cord.
l
Push in until firmly in place.
l
Gently screw the external
connector sleeve clock-wise to secure (optional).
l
Plug direct power source into a nearby receptacle.
l
The instrument is now ready for use.
To instrument
10
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 83 84

Comentarios a estos manuales

Sin comentarios