Welch Allyn PROPAQ CS Manual de usuario descargar pdf (Pagina 7)

Mainstream CO

Sensor

•

Mainstream NDIR single-beam, single

path/wavelength, ratiometric

•

Warm-up time (CO

sensor and monitor):

45 sec typical, 3 minutes maximum

•

Automatic zeroing

•

No routine calibration

•

Operating altitude: -2,000 to 15,000 ft

(817 to 429 mmHg)

•

Dimensions: 1.003 in (H) x 1.036 in (W) x 0.78 in (L)

(2.5 x 2.6 x 2.0 cm)

•

Weight: 12 g (< 0.43 oz)

•

Cable length: 10 ft (3.05 m) nominal

Airway Adapters

•

Disposable or multi-use

•

Size: 15 mm ID (meet ISO specifications)

•

Single or multi-use adult/pediatric airway adapter

for patients who weigh < 5 kg:

Added deadspace: < 6 cc (0.37 cubic in)

•

Single use low deadspace airway adapter

for

patients who weigh < 5 kg:

Added deadspace: < 0.6 cc (0.037 cubic in)

Wireless Option

•

FlexNet

™

Network: 2.4 GHz Wireless Local Area

Network (WLAN) and 10/100 Base-T Ethernet

network

•

Frequency: 2.402 to 2.480 GHz (USA)

•

Modulation: GFSK, Frequency Hopping Spread

Spectrum (FHSS)

•

Output power: 112 mW (maximum)

•

IEEE 802.11 compliant

•

Wireless Propaq CS monitors per Access Point:

7 (max.)

Nurse Call Option

•

Maximum switch current: 1A

•

Maximum switch voltage: 30 V AC/DC

•

Isolation: 1500 Vrms

•

Alarm relay: Energized during apnea alarm or

patient alarm

•

Customized cable: One end is a 4-pin plug,

compatible with the monitor’s nurse call

connector; the other end must be customized to

connect to the local nurse call system

Printer Option

•

Thermal sensitive dot

•

Numeric annotation: date, time, all active

parameters, patient name if connected to Acuity

•

Number of waveforms printed simultaneously:

up to 3

•

Print speeds: 6.25, 12.5, 25.0 mm/sec

•

Format: 53 mm wide print area on 60 mm wide paper

•

Operating modes:

Continuous: start/stop real-time printouts with

all active numerics and up to 3 waveforms

Snapshot: 8 sec (32 sec for CO

/Resp) of

immediate history for all active numerics and up

to 3 waveforms

Alarm print: 20 seconds total/12 seconds prior

to alarming parameter

Auto print: Snapshot printout every 15 or 30

min, or 1, 2 or 4 hours

Trend print: On demand or Auto Trend every

4 hours. Up to 8 hours in tabular format.

OxyCRG trend print: Print-only function (CO

Resp must be installed): 2 min printout of trended

HR/PR and SpO

numerics and compressed CO

or Resp waveforms (CO

is priority source), with

annotation and MIN/MAX tabular report

OxyCRG on alarm: Set to print out 60 sec after

HR/PR or SpO

alarm or 75 sec after BR/RR or

apnea alarm

Apnea ticket: Auto print HR/PR, SpO

and

elapsed time after apnea event and after 1

minute of continued apnea

Cuff ticket: Auto print NIBP, HR/PR, SpO

, CO

and RR/BR after each NIBP reading

Alarms

•

All parameters: upper/lower limits

•

All parameters: Adult/Pediatric/Neonate patient

mode-specific limits

•

Factory default or programmable settings for

all patient modes

•

Alarm indicator: red

•

Alarm(s) off indicator: yellow

•

Audible alarm tone: high/med/low

•

Alarm suspend: 90 seconds

•

One-button Stat Set for all alarm limits

(except Apnea Delay)

•

EQ Alert: yellow

Trends

•

Tabular numeric format

•

All parameters trended/viewable

•

Resolution: non-NIBP trends entered every

2 min

•

NIBP trends entered after each reading

•

Duration: 5 hours non-NIBP trends

(up to 150 readings)

•

8 hours NIBP trends (up to 128 readings)

•

Page up/down trend view

Inservice Mode

•

Includes two sets of simulated patient data

including waveforms, for training and education

Color Active Matrix Display

•

Type: TFT (Thin Film Transistor) LCD module

•

Resolution: 640 x 480 pixels, 1 pixel = R+G+B

dots

•

Active viewing area: 6.73 x 5.10 in

(170.9 x 129.6 mm)

•

Pixel pitch: 0.0105 in (0.267 mm)

•

Viewing angle: U/D 40°, R/L 60° (typical),

≥ 10:1 contrast ratio

•

Contrast ratio: 150:1 (typical); measured in dark

room at center of screen

•

Display color: 18-bit (6 bits per primary color)

Waveforms and matching numerics: Predefined

•

Luminance: 200 cd/m

(typical); measured at

saturation point

•

Response time: 40 ms (maximum); “white

to black”

Environmental

•

Operating temperature: 5 to 40

C (monitor),

5 to 40 °C (printer)

•

Operating relative humidity: 15% to 95%,

noncondensing (MIL STD 810E), printer 35%

to 85%, noncondensing (MIL STD 810E)

•

Operating altitude: -2,000 to 15,000 ft

(-610 to 4,572 m)

•

Shipping/Storage temperature: -20 to 60

°C

•

Shock: 50 g (monitor); 30 g (expansion

module/printer)

•

Random vibration: Designed to meet RTCA

DO-160D, category C (monitor)

•

Electromagnetic compatibility (EMC): per

EN60601-1-2, 1993

•

Drip-proof per IEC 529, level IPX1 (monitor)

Physical

•

Monitor (including handle):

Size: 8.2 in (H) x 9.6 in (W) x 5.6 in (D)

(20.8 x 24.4 x 14.1 cm)

Weight: 7.6 lb (3.4 kg)

•

Monitor with SpO

Module:

Size: 8.2 in (H) x 9.6 in (W) x 7.7 in (D)

(20.8 x 24.4 x 19.7 cm)

Weight: 10.8 lb (4.9 kg)

•

Monitor with Expansion Module

(with Printer/SpO

/MSCO

)

Size: 11.4 in (H) x 9.6 in (W) x 7.7 in (D)

(28.8 x 24.4 x 19.7 cm);

Weight: 14.4 lb (6.5 kg)

Power

•

Rechargeable sealed lead acid internal

battery pack

•

Internal recharger

•

Input voltage: 12 to 28 VDC, 25 W

•

AC power adapter: 100 to 120 VAC, 50 to 60 Hz

(North America/Japan); 220 to 240 VAC, 50 to

60 Hz (International)

•

Operating time on battery, typical*: Monitor

with SpO

option: 4 hours; Monitor with

Expansion Module (Printer, SpO

/CO

): 3 hours;

Monitor only: 2 hours

•

Battery recharge time: 6 to 8 hours

(when monitor OFF)

•

Battery recharge time: 8 to 12 hours

(when monitor ON)

Certifications/Standards

•

Complies with relevant AAMI, IEC, EN, CSA

and UL standards. CE Marked according to

the European Medical Device Directive. CSA

Certificate of Compliance for use in the U.S.

and Canada

VA Contract V797P-3486k

DSCP Contract SP0200-97-D-8021

* Fully charged, new battery at 25 °C, NIBP and

Snapshot (if applicable) every 15 minutes, all

accessories used.

Smartcuf, Propaq and Acuity are registered trademarks of

Welch Allyn. Other product and company names mentioned

herein are for identification purposes only and may be the

trademarks or registered trademarks of their respective

companies. Specifications subject to change without notice.

The Propaq CS is configurable with:

• Heart/Pulse rate*

• 3- or 5-lead ECG*

• Motion-tolerant noninvasive blood pressure*

• Temperature (2 channels)*

• Invasive blood pressure (up to 2 channels)

• Masimo

SET Motion-Tolerant pulse oximetry*

• Nellcor OxiMax

pulse oximetry*

• Capnography (mainstream and/or sidestream)

• Impedance respiration/apnea*

• Acuity

Central Station interface (wireless/hardwire)

• Nurse call interface

*Standard Features

The Welch Allyn

Propaq

Vital signs monitoring where you

need it, when you need it.

Propaq

CS Specifications

All Propaq vital signs monitors come standard

with Smartcuf technology, a new standard in NIBP

accuracy. This patented software offers industry-

leading performance and accuracy in the presence

of motion artifact.

Only Masimo SET SpO

sensors should be

used with Masimo pulse oximetry. Masimo

and Masimo SET are registered trademarks

of Masimo Corporation.

Only Nellcor

OxiMax

pulse oximetry sensors

should be used with the Nellcor pulse oximetry

option. Nellcor and OxiMax are registered

trademarks of Nellcor Puritan Bennett, Inc.

8500 S.W. Creekside Place

Beaverton, OR 97008-7107

phone 503.530.7500

fax 503.526.4200

toll-free 80

.289.2500

technical support 800.289.2501

www.welchallyn.com

MC 3146 SM2517RevC Propaq CS 2/1/06 9:37 AM Page 2

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Welch Allyn PROPAQ CS Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Welch Allyn PROPAQ CS